JS-06H Electric Actuator
KUHNWAY ELECTRIC ACTUATOR
Description
• Features low power consumption, high precision, multi-functionality, and compact structure.
• Adopts an integrated waterproof design with a PC material cover, an aluminum alloy base, and a painted main body.
• Modular design control board, allowing for equipment adjustments based on requirements.
• Built-in motor overheat protection (>125°C ± 5°C).
• Equipped with a valve position indicator on the top or indicator lights on the control panel.
• Valve body mounting holes: Comply with ISO 5211 standards, with a floating sleeve design for the output shaft.
• Applicable working pressure: Up to 10 kg/cm². If the working pressure exceeds this limit, a larger actuator specification is required.
• The entire series is equipped with a manual operation device.
JS-06H is a quarter-turn electric actuator. The standard model features an On/Off switch type, with an optional proportional controller available for precise valve opening adjustments. Designed for simplicity, the JS series electric actuator is easy to install and set up, making it ideal for small valves. JS actuator offers multiple input voltage options to accommodate various application requirements.
Specifications (ON/OFF Standard Type 110/220VAC)
1. Maximum torque : 600 N.m
2. Time for 90 ° : 36 / 30 sec ( 50 / 60 Hz)
3. No-load current consumption
• 110V 1 phase : 2.8 / 2.4 A ( 50 / 60 Hz)
• 220V 1 phase : 1.1 / 0.8 A ( 50 / 60 Hz)
4. Manual override : Handwheel
5. Weight : 9.1 kg
6. Mounting flange (ISO 5211) : F07, F10, F12
7. Rated voltage : 100~120VAC、200~240VAC/1-ph
8. Ambient temperature : -10°C ~60°C
9. Environmental Humidity:30%~95%RH
10. Insulation : IP 67
11. Certificate : CE
12. Cable Entry Specification : 1/2"PF
13. Included Accessories : Cable gland x 1pc
14. Duty cycle :
• 30% (110 VAC 1 phase)
• 38% (220 VAC 1 phase)
* Definition of Duty Cycle is in accordance with IEC60034-S4 duty type, e.g., for an actuator with 25% Duty Cycle in 40 sec, after operating for 10 seconds, JS rests for 30 seconds at 25°C/77°F.
Options
1. Heater
2. Extra Limit Switches
3. Build-in LED position indicator
4. Modulation type
5. Potentiometer ( 5k Ohm )
6. Voltage
• 24 VDC
• 24V AC/DC
• 220, 380, 440, 460 VAC 3-phase