MT15~50SC Normally Open Steam Solenoid Valve
QUEEN SOLENOID VALVES
Discription
-
The normally open pilot-operated solenoid valve can be selected for use with steam or water.
-
It is suitable for steam, air, inert gases, water, and oil (viscosity below 50 cst).
-
Can be mounted in vertical and horizontal position.
-
Features dual pilot holes for fast response.
-
The "M17" marking indicates a waterproof coil with an IP65 rating.
-
Maximum pressure options include 10 kgf/cm² and 12 kgf/cm².
Specifications
Model
(1) MT-15SC-(M17)
(2) MT-20SC-(M17)
(3) MT-25SC-(M17)
(4) MT-32SC-(M17)
(5) MT-40SC-(M17)
(6) MT-50SC-(M17)
Action mode
Normally open
Voltage
AC 24, 110, 220, 380V 50/60 Hz
DC 12, 24V
Media
Steam, air, gas, water, oil
Fluid temp.
-5~90°C
-5~200°C (For steam type)
Fluid viscosity
Oil : 50 cst or less
Pressure range
Air, water, gas : 0.3~10 kgf/cm2
Oil : 0.3~7 kgf/cm2
Connection size
(1) PT 1/2"
(2) PT 3/4"
(3) PT 1"
(4) PT 1-1/4"
(5) PT 1-1/2"
(6) PT 2"
Orifice
(1) 20 mm
(2) 20 mm
(3) 25 mm
(4) 32 mm
(5) 40 mm
(6) 50 mm
Cv valve
(1) 7.4
(2) 7.4
(3) 12.0
(4) 15.0
(5) 20.0
(6) 33.0
Direction
Vertical / Horizontal
Valve material
BSBF
Coil type
Iron case coil: IP54
Waterproof coil: IP65
Order Information
Cautions
1. Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
-
AC voltage tolerance: ±10%
-
DC voltage tolerance: ±1%
2. If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
3. Please install the solenoid valve in the direction of the fluid.
4. Pilot-operated solenoid valves require a minimum pressure to open.
5. Not suitable for freezing fluids.
Certificate
- CE