BT(F)E High Flow Rate Solenoid Valve - DN40~400
QUEEN SOLENOID VALVES
Discription
-
Suitable for air and general clean water fluids.
-
This model requires a minimum working pressure of 1.0 kgf/cm².
-
This product is not suitable for some rainwater harvesting systems.
-
The "M13" marking indicates a waterproof coil with an IP65 rating.
-
Valve body test pressure / Maximum Working Pressure :
- JIS-10K: 16 kgf/cm² ; 10 kgf/cm²
- JIS-16K: 24 kgf/cm² ; 16 kgf/cm²
-
Other flange specifications: Test at 1.5 times the nominal pressure.
-
Model designation :
- BTE (Threaded type), BFE (Flanged type)
- FC (Cast iron), BC (Bronze), DI (Ductile iron), SCS (Stainless Steel)
E-40~400-M13.jpg)
Specifications
Model
(1) BTE-40~50-M16-(FC,BC,DI,SCS)
(2) BFE-50~400-M16-(FC,BC,DI,SCS)
Action mode
Normally closed
Voltage
AC 24, 110, 230V 50/60 Hz
DC 12, 24V
Media
Water, air
Fluid temp.
-15~80°C
Fluid viscosity
-
Pressure range
Water, air : 1~10 kgf/cm2
Connection size
(1) PT 1-1/2"~2"
(2) Flange 2"~16"
Direction
Horizontal
Valve material
FC (Cast Iron)
BC (Bronze)
DI (Ductile Iron)
SCS (Stainless Steel)
Coil type
Waterproof coil: IP65
Order Information
Cautions
-
Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
- AC voltage tolerance: ±10%
- DC voltage tolerance: ±1% -
If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
-
Please install the solenoid valve in the direction of the fluid.
-
Pilot-operated solenoid valves require a minimum pressure to open.
-
Not suitable for freezing fluids.
Certificate
-
CE