BMT(F) High Flow Rate Solenoid Valve - With Manual Override
QUEEN SOLENOID VALVES
Discription
-
Suitable for air and general clean water fluids.
-
Pilot-operated solenoid valve with manual switch, allowing valve operation during power outages.
-
This model requires a minimum working pressure differential of 1.0 kgf/cm².
-
This product is not suitable for some rainwater harvesting systems.
-
The "M13" marking indicates a waterproof coil with an IP65 rating.
-
Valve body test pressure :
- Cast iron: 21 kgf/cm²
- Bronze: 21 kgf/cm²
- Ductile iron: 32 kgf/cm²
-
Model designation :
- BMT (Threaded type), BMF (Flanged type)
- FC (Cast iron), BC (Bronze), DI (Ductile iron), SUS13(S.S304)
Specifications
Model
(1) BMT40~50-M13-(FC,BC,DI,SCS13)
(2) BMF50~400-M13-(FC,BC,DI,SCS13)
Action mode
Normally closed
Voltage
AC 24, 110, 220, 380V 50/60Hz
DC 12, 24V
Media
Air, water
Fluid temp.
-15~80°C
Fluid viscosity
-
Pressure range
Air、water : 1~10 kgf/cm2
Connection size
(1) PT 1-1/2"~2"
(2) Flange 2"~16"
Direction
Horizontal
Valve material
FC
BC
DI
SCS13
Coil type
Waterproof coil: IP65
Order Information
Cautions
-
Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
- AC voltage tolerance: ±10%
- DC voltage tolerance: ±1% -
If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
-
Please install the solenoid valve in the direction of the fluid.
-
Pilot-operated solenoid valves require a minimum pressure to open.
-
Not suitable for freezing fluids.
Certificate
-
CE